Download BibleWorks

Note to users outside of the USA

If you are downloading from outside of the USA, we recommend you use a different page. Click here if you are downloading from outside the USA.

Note to Windows Users

If you are running in Windows (vs. OS X on a Mac), we recommend you click here to try the Windows downloader.

Otherwise, Mac users and those who want to manually download and install from an ISO file should follow the steps below.

Enter your activation code

The installation files for BibleWorks 10 are stored in a .ISO image file. To download the .ISO image file for BibleWorks 10, please enter your activation code below and press the Submit code button.


The activation code is of the form BW10-BBBB-CCCC-DDDD-EEEE and was sent to you when you originally ordered the program. If you do not have your code, you may contact us.

Download the .ISO image file

Please keep the following in mind when downloading the .ISO image file:

  1. The download file is very large (19.5 GB) and depending on the speed of your connection, may take many hours, or over a day, to complete.
  2. Unless you have a very fast and stable internet connection, we highly recommend using one of the many free download managers available for PCs and for Macs.
  3. The setup program cannot be run until it is fully downloaded. The .ISO image filesize is as follows:
      BibleWorks10rev6.iso: 23,994,171,392 bytes
      BibleWorks10rev4.iso: 21,747,793,920 bytes
      BibleWorks10rev2.iso: 20,981,874,688 bytes
      BibleWorks9rev4.iso: 12,726,763,520 bytes
    Please verify the file size once your download is complete.
  4. Your temporary download link will last for 48 hours. After that your link will expire. Customers are permitted to generate a total of two temporary download links.

To download the .ISO image file, please read the instructions below. Then, click with the right mouse button on the link below.

[Please first enter your module activation code above.]

Depending on your browser, you may see one of the menus below.

Sample Firefox menu

   

Sample Chrome menu

   

Sample Internet Explorer menu

   

Select Save link as... or Save Target As... from the menu.

Then, select the folder where you want to store the installer file (e.g. Desktop, or My Documents). Please remember this location in case you want to backup the installer file. Then, when the folder is set, click the Save button.

Once the download is completed, please move to the next section below.

In Internet Explorer, if you are presented with the warning below, you may ignore it by clicking the X button (circled below):

Back up your .ISO image file

We strongly recommend that you backup your .ISO image file to some form of removable media. Without a backup of the file, you will be unable to re-install BibleWorks on your computer or on a new computer and will be charged a replacement download/media fee.

Please move to the next section to install the program.

Install the program

After downloading the .ISO image file, please follow these instructions to install the program.

  1. Verify the file size of your .iso file matches the file size given above. If it does not match, you have an incomplete download and need to resume or retry downloading.
  2. You will need to go the the folder where you saved the file. You can show your folders by holding the Windows key on your keyboard , and then simultaneously pressing the e key on the keyboard. The Windows Explorer will open:
  3. Navigate to the folder containing the .ISO file that you downloaded.
  4. Right-click on the .ISO file (usually named something like BibleWorks10XXX.iso) and select Mount or Mount Image.

    Note: If you are running a third-party program like Cyberlink or Power2Go, you need to avoid opening the .ISO file in those programs. Instead, right-click on the .ISO file and select Open with. Then, select Windows Explorer or File Explorer.
  5. This mounts the .ISO image file, and it will appear as a drive on your computer. When the installer image is mounted it should open a Finder/Explorer window.

    If when you attempt to mount the .iso file you get the message "Couldn't Mount File. Sorry, there was a problem mounting the file.", the download manager has marked your .ISO file as a "sparse file." To correct this, simplly make a copy of the .ISO file and attempt to mount the copy instead.
  6. Once the installer image is mounted, double-click on the setup (or setup.exe) program and follow the installation instructions shown on screen.
  7. Once installation is complete, you can dismount the drive (right-click on the drive letter and select eject/dismount).
  8. After saving any user created files (notes, diagrams, etc.), you may now delete your old BibleWorks folders from earlier versions of BibleWorks.

If you have any problems installing, don't hesitate to contact us.

Install on another computer

If you are attempting to install or re-install on another computer, you need to copy the installer file to the new computer. Depending on what is available, you can use a USB thumb drive or other portable storage device, or even your network to copy the module installer file to the new computer.

Once the installer is on the new computer, simply follow the installation instructions in the previous section.

Install the program (Windows XP/Vista/7)

After downloading the .ISO image file, please follow these instructions to install the program. Users running Windows 8, Windows 10, or OS X/macOS should folow the instructions above. These instructions below only apply to Windows XP/Vista/7.

  1. Verify the file size of your .iso file matches the file size given above. If it does not match, you have an incomplete download and need to resume or retry downloading.
  2. You will need to first install a utility that lets you mount ISO files as virtual DVD drives. The free utility we recommend is Virtual CloneDrive. You can download it here: http://static.slysoft.com/SetupVirtualCloneDrive.exe. Note: The program you want to install is Virtual CloneDrive, not AnyDVD.
  3. You will need to go the the folder where you saved the file. You can show your folders by holding the Windows key on your keyboard , and then simultaneously pressing the e key on the keyboard. The Windows Explorer will open:
  4. Navigate to the folder containing the module installer file that you downloaded.
  5. Right-click on the .ISO file (usually named something like BibleWorks10XXX.iso) and select Mount or Mount Image.This mounts the .iso image file, and it will appear as a drive on your computer. When the installer image is mounted it should open a Finder/Explorer window.

    If when you attempt to mount the .iso file you get the message "Couldn't Mount File. Sorry, there was a problem mounting the file.", the download manager has marked your .iso file as a "sparse file." To correct this, simplly make a copy of the .iso file and attempt to mount the copy instead.
  6. Once the installer image is mounted, double-click on the setup (or setup.exe) program and follow the installation instructions shown on screen.
  7. Once installation is complete, you can dismount the drive (right-click on the drive letter and select eject/dismount). If you are running Virtual Clone Drive you can dismount the drive using the VCD window (or just uninstall Virtual Clone Drive).
  8. After saving any user created files (notes, diagrams, etc.), you may now delete your old BibleWorks folders from earlier versions of BibleWorks.

If you have any problems installing, don't hesitate to contact us.

1.03a